0 [ Stalni link ]

Step 1:

Power off you Galaxy S4 and hold down Volume Down, Center Home, and Power buttons together for about 5 seconds.
Step 2:

When you see the warning screen, let go of all buttons then hit the Volume Up button to enter ODIN Download mode.
Step 3:

Connect a micro-USB cable from your Galaxy S4 to your computer.
Step 4:

Next, download CWM recovery for your Galaxy S4. ClockworkMod is currently available for GT-i9500, Sprint SPH-L720, and T-Mobile SGH-M919 models.

Also download ODIN, Samsung USB Drivers, and SuperSU Zip files.
Step 5:

Unzip ODIN and run the odin3 v1.85.exe file by double-clicking on it.

If you see a yellow highlighted box like shown below, you are good to go, if not, double-click on the Samsung USB drivers EXE file you downloaded earlier and install drivers, then unplug/re-plug the micro-USB cable to your phone. You should see yellow highlighted box.

Next, choose PDA, then browse to the CWM recovery you downloaded earlier for your Galaxy S4. (It’s a file ending in .tar) Hit Start to begin flash CWM recovery to your phone.
Step 6:

This will flash a custom CWM recovery to your Galaxy S4 and your phone will reboot.

If you see “PASS!” that means everything went successfully.
Step 7:

Next, after your phone reboots, copy the SuperSU zip file you downloaded earlier to anywhere on your Galaxy S4.
Step 8:

Power off your Galaxy S4 then hold down Volume Up, Center Home, and Power buttons together.
Step 9:

When you see the Samsung logo, keep holding down Volume Up and Center Home buttons but let go of the Power button.
Step 10:

Once in CWM Recovery, choose “install zip from sdcard” and hit the Power button.
Step 11:

Choose “choose zip from sdcard” and hit the Power button.
Step 12:

Choose “0/” directory and hit the Power button.
Step 13:

Browse and find the SuperSU zip file you copied over earlier and hit the Power button.
Step 14:

Choose “Yes” and hit the Power button.
Step 15:

This will install su binaries and SuperSU superuser app on your phone. This essentially “roots” your Galaxy S4.
Step 16:

Go back to main menu and choose “reboot system now”, then hit Power button. Your Galaxy S4 will reboot.
Step 17:

Once rebooted, you should find SuperSU app in your app drawer.
Step 18:

Run the SuperSU app once and update the binaries.
Step 19:

You can verify you have full root by downloading and opening rooted app like Titanium Backup app (which I highly recommend for backing up/freezing/un-installing your apps).

You should see a Superuser request window pop-up!
Done


http://wiki.cyanogenmod.org/w/Install_CM_for_serranoltexx

http://true-android.blogspot.com/2013/10/download-latest-gapps-or-google-apps.html

0 [ Stalni link ]

http://deflate.medialayer.com/

Installation

wget http://www.inetbase.com/scripts/ddos/install.sh
chmod 0700 install.sh
./install.sh

Uninstallation

wget http://www.inetbase.com/scripts/ddos/uninstall.ddos
chmod 0700 uninstall.ddos
./uninstall.ddos

Questions?

0 [ Stalni link ]

3. Now that the cronjob is ready to go, you need to ensure that this cronjob will persist through a reboot. You'll need to add the following two lines to /etc/rc.local (ensure that the cron entry matches what was defined above). In ESXi 5.1, you will need to edit /etc/rc.local.d/local.sh instead of /etc/rc.local as that is no longer valid.


/bin/kill $(cat /var/run/crond.pid)
/bin/echo "0 0 16 * * /vmfs/volumes/datastore1/ghettoVCB/ghettoVCB.sh -f /vmfs/volumes/datastore1/ghettoVCB/vms_to_backup > /vmfs/volumes/datastore1/ghettoVCB/ghettoVCB-backup-$(date +\%s).log" >> /var/spool/cron/crontabs/root
/bin/echo "0 21 20 2,4,6,8,10,12 * /vmfs/volumes/datastore1/ghettoVCB/./copy.sh" >> /var/spool/cron/crontabs/root
/bin/busybox crond


1. Setup the cronjob by appending the following line to /var/spool/cron/crontabs/root:

0 0 16 * * /vmfs/volumes/datastore1/ghettoVCB/ghettoVCB.sh -f /vmfs/volumes/datastore1/ghettoVCB/vms_to_backup > /vmfs/volumes/datastore1/ghettoVCB/ghettoVCB-backup-$(date +\%s).log
0 21 20 2,4,6,8,10,12 * /vmfs/volumes/datastore1/ghettoVCB/./copy.sh

0 [ Stalni link ]

would you like to add it anyway?

You must start kerberos KMS
and after that restart DNS server and DNS client and access is OK

0 [ Stalni link ]

when fail2ban plugin not working in munin, like no graphs because of selinux....
semodule -DB

after 15 minutes

semodule -B

after that

ausearch -m avc -ts today | audit2allow -M myfix1

semodule -i myfix1.pp

and
service munin-node restart